HPI hpi10072

This is the 1/10 scale glow powered, radio controlled, on-road HPI Nitro RS4 3 Ready to Run Drift Car with the T0Y0TA Soarer Body. **Additional Technical Info Will Be Added When It Becomes Available.** FEATURES: Chassis: .098 (2.5mm) thick anodized aluminum, purple in color, drift optimized with repositioned center of gravity to help car rotate smoothly for easy drifting, 7.5 (190mm) width accepts all 190 and 200mm bodies Drive: Four wheel shaft drive Radio: 2-channel pistol grip with enclosed receiver/battery box Engine: HPI G3.0 .18 cu in (3cc) with pull-start, foam air filter rotary carburetor, Exhaust: with high-flow aluminum header and rear exit exhaust tube Fuel Tank: 2.53oz (75cc), flip top cap Clutch: 2-shoe Transmission: Single-speed Ball Bearings: Shocks: Four oil-filled, with drift rate springs Main Gear: Clutch bell: Gearbox: Sealed, front and rear Differentials: Sealed, with metal bevel gears, limited slip front differential Brakes: Single disc, fiber construction Tires: Type A drift radial Wheels: Volk TE-37 five spoke chrome wheels ( mm) wide, ( mm) diameter Body: Painted and trimmed JDM T0Y0TA Soarer and racing wing Bumper: Front foam Suspension: Four wheel independent Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bellcrank Servo Saver: Included INCLUDES: HPI Nitro RS4 3 Ready to Run Drift Car with the T0Y0TA Soarer Body G3.0 .18 cu in (3cc) engine with pull starter, glow plug, 2-channel radio, and instructions REQUIRES: Radio Batteries: 12 AA size Fuel: 2-stroke glow fuel with 10%-15% nitromethane, 16% lubricant- Most of the fuels we carry meet or exceed the lubricant content required for optimum performance and maximum engine life. In the past, the conventional lubricant content used in fuel was 18%. But with new advanced technologies, fuels like Red Alert and O'Donnell for example, have a better quality of lubricants even though the percentages of lubricant content are lower. These high-tech lubricants provide exceptional cooling and protection. SPECS: Vehicle- Length: Width: 7.5 (190mm) Height: Weight: Wheelbase: Tread: Front- ( mm) Rear- ( mm) (wheels on-center side to-side) Front Track: Rear Track: Ground Clearance: Body- Length: Width: ( mm) at rear wheels (widest point) 7 (178mm) behind from wheels (thinnest point) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. (2) 10 x 15mm spur gear shaft (use 1-DTXC1595) (4) 5 x 11mm front & rear gearbox (use 2-DTXC1547) (4) 10 x 15mm front & rear gearbox (use 2-DTXC1595) (2) 5 x 11mm front wheel hubs (use 1-DTXC1547) (2) 10 x 15mm front wheel hubs (use 1-DTXC1595) (4) 5 x 11mm rear wheel hubs (use 2-DTXC1547) (2) 5 x 10mm clutch bell (use 1-DTXC1535) For an alternative engine from O.S. Max, the .18CV-RX w/Pull Starter (OSMG2104) and Complete One-Piece Pipe Set (OSMG2988) can be used. jxs 12/24/07