Chassis: Nylon composite construction 0.08 (2mm) thick bathtub type
Drive: Four wheel
Radio: TRA TQ 2-channel 27MHz AM with waterproof digital high-
torque steering servo, waterproof receiver box, transmitter does
not have charge jack
Electronic Speed Control: TRA VXL-3m waterproof, with high-
current connector, training mode, reverse and low voltage detection
for use with 2S and 3S LiPo packs
Motor: TRA Velineon 380 brushless motor with Neodymium magnets,
sintered rotor and high RPM ball bearings, 3.5mm gold plated bullet
connectors
Spur Gear: 45 tooth
Pinion Gear: 28 tooth 48 pitch, extra pinion gear included for 50+
MPH operation with extra battery (see below)
Battery: One TRA Power Cell 6-cell stick nimh with high current
connector, dual battery capability (extra battery (TRAC2925) and
series adapter (TRAP3063) not included and must be purchased
separately), vehicle is also compatible with 2S and 3S LiPo packs
(not included) LiPo mode on ESC must be selected
Battery Charger: 110V wall type
Body: Painted and trimmed with applied decals
Bumper: Front, black chrome
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
telescoping universal joint shafts
Transmission: Ball bearing equipped with adjustable slipper clutch
Differentials: Sealed silicone filled planetary gear type
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Multi terrain, with foam inserts 1.8 (46mm) wide, 3.2
(82mm) diameter
Wheels: Gemini 5-spoke with black chrome finish 1.5 (38mm) wide,
2 (51mm) diameter, standard size 12mm hex
Steering arm with spring loaded servo protection

YOU WILL RECEIVE:

RTR TRA Slash VXL E-Revo Racing Monster Truck with 2-ch radio,
painted body, 6-cell battery, charger, extra pinion gear and
instruction manual

REQUIREMENTS:

AA Batteries: Eight for transmitter

SPECIFICATIONS:

Vehicle-
length: 12.9 (328mm)
width: 9.4 (239mm)
height: 4.6 (117mm)
Front and Rear Track: 9.4 (239mm) distance between outer edges of
wheels
Wheelbase: 7.9 (202mm)
Ground Clearance: 1.7 (43mm)
Body-
length: 11.3 (288mm)
width: 4.3 (110mm)
height: 2.8 (71mm)

COMMENTS:

The ball bearings in the TRA Slash VXL are rubber sealed.
Following are the stock numbers for the replacement bearings from
TRA and non-rubber sealed alternatives from Duratrax;
Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov