Axial Racing AXIAX90025

Axial Racing brand 1/10 scale Electric Powered, Radio Controlled
Yeti Rock Racer Kit from Axial.
**Additional Technical Info Will Be Added When It Becomes Available. **

Chassis: Plastic tub type with bolt-on 4 link mount for rear
suspension,
Drive: Four wheel, WB8 HD Wildboar 3-piece rear driveshaft with
strengthened slider-floater tube, captured cross pin design
eliminates older set screw design for greater durability and ease
of maintenance
Shocks: Icon aluminum body, oil filled
Steering: Updated dual shear rack with full ball bearings and
machined steel guide posts
Transmission: Single speed with brushless motor gearing (2nd gear
fixed), adjustable motor mount, 2-speed optional gear set will be
available in the future
Slipper Clutch: Dual design uses a pad on each side of spur gear for
added surface area for more precise tuning and holding power
Front Suspension: Independent design allows better control direction
of travel ant high speeds when one side is adjusting to road
obstructions
Rear Suspension: AR60 rear solid axle, multiple tuning options, three
upper link positions to adjust anti-squat, lower link mounts can be
flipped to change roll center, long travel sway bar, aluminum lower
link plates
Front Bumper:
Wheels: 2.2 Method IFD (interchangeable face design), black in color
Tires: 2.2 (56mm) diameter Falken WildPeak R35 compound
Receiver Box: Waterproof
Body: Molded lexan, one-piece with separate roof, scale accessories
molded grill, headlight buckets and hood vents, body attaches
using multiple attachment points
Battery Tray: Fully adjustable, accomodates most standard size 2S and
3S LiPo batteries
Driver Figure: Molded-in race suit with three interchangeable
helmets, motocross, open skull-face or motorsport version

RTR Yeti Rock Racer with Body, Beadlock Wheels, Tires, Body
Accessories, 3-Driver Helmets
Instruction Manual

Radio: 2-channel with high-torque steering servo
Motor:
ESC: To match selected battery
Battery: 2S or 3S LiPo pack with Dean's connector
Battery Charger: To match selected LiPo Battery
LiPo Charging Sack, Track and Maintenance Eequipment

Vehicle,
length: 19.5 (495mm)
width: 12.3 (312mm)
height: 7.7 (195mm)
Wheelbase: 14.25 (360mm)
Ground Clearance: 2 (50mm)
Weight: 6.51lbs (2.9kg)
Body,
length: 17.2 (437mm)
width: 7.3 (185mm)
height: 5.5 (140mm) including roof
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Front Hubs 1 DTXC1595
2 5x11mm Front Hubs 1 DTXC1547
2 10x15mm Front Gearbox 1 DTXC1595
2 5x11mm Input Shaft 1 DTXC1547
2 5x11mm Rear Diff 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
2 10x15mm Rear Diff 1 DTXC1595
10 5x11mm Transmission 5 DTXC1547
jxs 01/07/15