Futaba FUTK4900

This is the Futaba 4PK Pistol Grip Transmitter and the R604FS Receiver with the 2.4GHz FASST system for surface use. Servos are not included. Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antenna built into the receiver ensuring that model stays under constant control of transmitter regardless of altitude Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict "New Driver" "Race Ready" "Expert" and "Big Car" menus that add functions based on skill level and experience Throttle Mode Select for selecting acceleration/brake servo neutral points between 70/30 for nitro or 50/50 for electrics, throttle programming options including 5-point curve, expo and VTR Slide the power switch to "display" to set up without transmitting- use one of the four menus provided or create a custom menu, optimize response for analog or digital/brushless servos, set up two sets of dual rates, choose two Condition Select functions, restore factory settings with the adjuster function, or adapt electronic speed control to HRS frame rates with MC link Traction control/acceleration rate Custom menu assignments Data transfer ABS braking Boat mixing-in addition to great performance in R/C car and truck applications, this system is also ideally suited to the rigors of boat racing Direct Select single button acccess to eight preassigned functions Forty model memory with ten character model naming Fourth channel for 4WS, transponders, brake bias and more VTR, acceleration, speed, expo, mode, tension and 5-point curve (throttle) Two programmable mixes Electronic and mechanical ATL (brake side only) Condition select 2 Programmable battery fail safe Start function/engine cut Right/Left hand use Channel 1-4 fail safes Assignable buttons and dials Digital trims memory and reset Navigation lap timer that sounds when target lap time is exceeded, up, down lap and systems timers One year limited warranty 4PK Pistol Grip Transmitter R604FS Receiver (FUTL7634) HT5F1700B 1700mAh 6V Transmitter Battery HBC-3B(4) 120V AC Battery Charger (FUTM1832) Switch Harness Manual Servos of modeler's choice (digital servos can be used in Normal or High Speed Mode, analog servos must be used in Normal Mode) Battery Charger- Input: 120V AC, 60Hz 5W Output: TX 6 VDC 170mA RX 6 VDC 100mA Receiver- Size: 1.54 x 1.02 x 0.55" (39 x 26 x 14mm) Weight: 0.49oz (14g) The 4PK is also compatible with the R603FS and R603FF receivers. (Adjustable Positioning Wheel Adapter is Optional) jxs 11/23/07 ir/jxs &