HPI HPI107112

$479.99
HPI logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
1/8 WR8 Flux w/Ford Fiesta Abu Dhabi WRC
HPI HPI107112 - 1/8 WR8 Flux w/Ford Fiesta Abu Dhabi WRC

This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale,
Ready to Run WR8 Flux F0RD Fiesta Rally Car from HPI.
FEATURES:
Chassis: 0.12" (3mm) thick silver anodized aluminum with composite
front and rear braces and plastic side dirt guards
Drive: Four wheel shaft
Radio: HPI TF-40 2.4GHz 3-channel with steering and throttle end
point adjustment, trim and dual rates, fail safe and SF10W
waterproof analog steering servo
Motor: Flux Vektor 4000kV brushless
ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable
with the #100573 Castle Link USB Programmer, HPIC0573 (not
included)
Differentials: Three, bevel gear type, oil filled
Shocks: Oil-filled, composite body with rear mud guards
Suspension: Front and rear sway bars, composite lower suspension arms
and solid upper links
Tires: Scale Michelin Tarmac Rally, 1.4" (35mm) wide, 3.1" (80mm)
diameter
Wheels: White plastic 1.4" (35mm) wide, 2.2" (56mm) diameter, 12mm
hex size
Ball Bearings: Full set
Pinion Gear: 15 tooth
Spur Gear: 46 tooth composite
Body: Trimmed and painted white with all sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to
slide over objects in the road
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: 2-year limited through manufacturer, valid only in USA,
Canada and South America
YOU WILL RECEIVE:
HPI RTR WR8 Flux F0RD Fiesta Rally Car with 2.4GHz Radio System,
ESC, brushless Motor, Body, 4 AA cells for Transmitter and
Instruction Manual
REQUIREMENTS:
LiPo Battery: 2-3S LiPo with at least 25C rating and 3500mAh and
Deans Female plug
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Building and track equipment
SPECIFICATIONS:
Vehicle-
length: 19.1" (485mm)
width: 8.9" (227mm)
height: 6.8" (172mm)
Wheelbase: 11.8" (300mm)
Body-
length: 18.9" (480mm)
width: 8" (203mm) behind front wheels, narrowest point
9.1" (232mm) at rear wheels, widest point
height: 6" (153mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
4 5x10mm Front Hubs 2 DTXC1535
4 5x8mm Rear Hubs 2 DTXC1523
6 10x15mm Differentials 3 DTXC1595
2 5x10mm Front Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
jxs 08/08/12
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov