HPI HPI106154
$259.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Sprint 2 Drift 2.4GHz RTR w/Nissan 350Z Body
HPI Racing brand 1/10 scale, electric powered, radio controlled, ready-to-run
HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body.
FEATURES:
Drive: Four wheel belt drive
Motor: 15 turn Firebolt, brushed
Radio: HPI TF-40 2.4GHz with waterproof steering servo and waterproof
receiver box
Electronic Speed Control: HPI SC-15WP LiPo compatible, waterproof
and reversible
Battery: 7.2V 2000mAh
Battery Charger: AC wall type
Ball Bearings: Full set included
Shocks: Oil-filled, plastic bodied, with special springs for drifting
Differentials: Planetary gear
Transmission: Single speed
Tires: Falken Azenis hard compound drift type X-pattern, 1 (26mm)
wide, 2.5 (65mm) outer diameter
Wheels: Officially licensed TE37 Rays/Volk design 5-spoke brown on
color, outer diameter 1.9 (48mm), width 1 (26mm), 3mm offset in
front and 6mm offset in rear for wide look seen on full-size drift
cars
Pinion Gear: 48 pitch steel
Spur Gear: 48 pitch, 87 tooth, composite construction
Body: Painted and trimmed Nissan 350Z
Bumpers: Front, foam
Suspension: Fully adjustable
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body, motor, electronic speed control, clear body, tires, foam inserts, wheels,
2000mAh battery, wall charger, radio batteries
pinion gear, 87 tooth spur gear, 2.4GHz radio, servo, two decal
sheets, instructions
REQUIREMENTS:
SPECIFICATIONS:
length: 17 (431mm)
width: 7.5 (190mm) - 8.0 (190mm) adjustable using offset
wheels
height: 5 (127mm)
Wheelbase: 10 (255mm)
Front Track: 7.38 (187.5mm) side to side at outer edges of wheel
Rear Track: 7.7 (194mm)
Front Tread: 6.5 (166mm)
Rear Tread: 6.8 (173.5mm) side-to-side at wheel centers
Ground Clearance: 0.31 (8mm)
BODY-
length: 16.5 (419mm)
width: 7.7 (195mm) at rear wheels (widest point)
7.1 (180mm) behind from wheels (thinnest point)
height: 5 (127mm)
COMMENTS:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 4x8mm Servo Saver 1 DTXC1511
2 4x8mm Middle Lay Shaft 1 DTXC1511
jxs 06/27/11
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov