Midwest Products MID6814
$23.93
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Midwest Trailing Edge 1-1/2 x 36 inch (10)
Midwest Products brand Package of 10 Pieces of Micro-Cut Balsa Trailing Edge Stock
(3/8 x 1-1/2 x 36) by Midwest Products Company.
FEATURES:
Balsa is the premier wood for all types of modeling projects.
Used to fashion the trailing edge on the wings of scratch built
airplanes.
Balsa cuts easily with a hobby knife, and may be stained or painted
to represent any wood type.
Midwest's Balsa is carefully dried in special kilns, reducing the
water content to leave a light wood with a high strength to weight
ratio.
Micro-Cut Quality Wood assures you of the following:
-Absolutely the most accurate thickness tolerances of ?.002
-Five step inspection process to insure consistent quality
-Highest quality raw materials
Unfinished
Cut to desired length
YOU WILL RECEIVE:
10 Pieces of Micro Cut Balsa Trailing Edge Stock (3/8 x 1-1/2 x 36
REQUIREMENTS:
Hobby Knife or Saw (for cutting)
Sanding
SPECIFICATIONS:
Width: 1-1/2
Length: 36
Thickness: 3/8
sdw 12/12/01
ir/kh
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
(3/8 x 1-1/2 x 36) by Midwest Products Company.
FEATURES:
Balsa is the premier wood for all types of modeling projects.
Used to fashion the trailing edge on the wings of scratch built
airplanes.
Balsa cuts easily with a hobby knife, and may be stained or painted
to represent any wood type.
Midwest's Balsa is carefully dried in special kilns, reducing the
water content to leave a light wood with a high strength to weight
ratio.
Micro-Cut Quality Wood assures you of the following:
-Absolutely the most accurate thickness tolerances of ?.002
-Five step inspection process to insure consistent quality
-Highest quality raw materials
Unfinished
Cut to desired length
YOU WILL RECEIVE:
10 Pieces of Micro Cut Balsa Trailing Edge Stock (3/8 x 1-1/2 x 36
REQUIREMENTS:
Hobby Knife or Saw (for cutting)
Sanding
SPECIFICATIONS:
Width: 1-1/2
Length: 36
Thickness: 3/8
sdw 12/12/01
ir/kh
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov