RJ Speed RJS2004

This is the 1/10 scale electric powered, radio controlled, 2WD RJ Speed Pro Mod Dragster Kit. _ Chassis: Composite fiberglass 3/32" (2.2mm) thick Drive: Rear wheel drive Brass bushings support the rear axle and front wheels Suspension: Adjustable pull rod rear suspension Gearbox: Open with rear pinion and spur gear Differentials: None, model has a solid rear axle Tires: 1/10 scale foam pan car style on black wheels on the rear and rubber O-ring style tires on black wheels on the front Wheels: Black plastic, multi-spoke on front and rear Camber: Fixed Steering: Adjustable Servo Saver: Required for steering servo (NOT INCLUDED) - KIMC1014 One Pro Mod Dragster Kit, mounted rear foam tires, front o-ring tires and wheels, 81 tooth spur gear (48P), 20 tooth pinion (48p), brass bushings, clear polycarbonate dragster body with window mask and wing and building instructions. _ Radio: 2-Channel with 1 Servo (two servos required if using a micro switch instead of a speed control. We do not stock a micro switch (25amp) that would work) Radio Batteries: (8) AA size Speed Control: Electronic of modelers choice Motor: 05 size motor of modeler's choice Battery: 6-10 cell stick or side-by-side with standard connector Charger: AC/DC timed or peak Paint: Polycarbonate paint of modeler's choice Misc. Items: Building and track equipment VEHICLE- Length: 11" (279mm) Width: Not available Height: Not available Weight: Not available Wheelbase: 11" (279mm) Tires- Front: 1.5" (38mm) diameter O-ring style Rear: 1/10 scale on-road foam style (4 bolt hub style) BODY- Length: 18.5" (470mm) Width: 7.5" (190mm) at rear wheels (widest point) Height: 4.3" (110mm) To upgrade from bushing to ball bearings, order; Qty. Size Qty. Bearing Set 4 1/8 x 5/16" Flanged 2 DTXC1403 2 1/4 x 3/8" Flanged 1 DTXC1433 jxs 6/03/08 ir/jxs &