Hot Racing SECT288
$32.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Steel Cv Axles Drive Shafts with Hubs ECX 2WD
Hot Racing optional upgrade heavy duty CV axle kit for 1/10th scale 2WD electric ECX vehicles, including the Amp, Circuit Stadium Truck, Ruckus Monster Truck, and Torment SCT. These axles will NOT work with the Boost Buggy. Kit includes axle, outdrive cups, and wheel hex hubs.
- Heavy duty CNC machined #45 hardened carbon steel construction
- Replaces factory plastic rear drive axles
- Hardened steel outdrives cups and 12mm wheel hex hubs
- Black oxide coated steel aids corrosion resistance
- Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
- Design eliminated CV pin setscrew
- Fully rebuildable
- Near zero backlash design
- Two (2) rear assembled CVD axles
- Two (2) steel outdrive cups
- Two (2) steel 12mm keyed hex hubs
- Reuses stock ECX1033 3x13mm driveshaft screws (screw shaft)
- Removable thread lock (e. g. blue Loctite) on screws threading into metal
- Light grease for CV joint helps maintain their longevity
- Overall length: 113 mm (4.45 inch)
- Dogbone length pin to pin: 75mm
- Dogbone pin diameter: 2.5mm
- NOT compatible with the ECX Boost Buggy
- For brushless and high power applications Hot Racing SECT288RC splined axles are recommended
- Replacement parts include: RECT288 (12mm hexes), RECT288A (outdrive drive hubs), RECT288C (CV rebuild), RECT288R (dogbone), and RECT288X (outer axle stub and hex)
description revised by: SN September 26, 2018
FEATURES:
- Heavy duty CNC machined #45 hardened carbon steel construction
- Replaces factory plastic rear drive axles
- Hardened steel outdrives cups and 12mm wheel hex hubs
- Black oxide coated steel aids corrosion resistance
- Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
- Design eliminated CV pin setscrew
- Fully rebuildable
- Near zero backlash design
YOU WILL RECEIVE:
- Two (2) rear assembled CVD axles
- Two (2) steel outdrive cups
- Two (2) steel 12mm keyed hex hubs
REQUIREMENTS:
- Reuses stock ECX1033 3x13mm driveshaft screws (screw shaft)
- Removable thread lock (e. g. blue Loctite) on screws threading into metal
- Light grease for CV joint helps maintain their longevity
SPECIFICATIONS:
- Overall length: 113 mm (4.45 inch)
- Dogbone length pin to pin: 75mm
- Dogbone pin diameter: 2.5mm
COMMENTS:
- NOT compatible with the ECX Boost Buggy
- For brushless and high power applications Hot Racing SECT288RC splined axles are recommended
- Replacement parts include: RECT288 (12mm hexes), RECT288A (outdrive drive hubs), RECT288C (CV rebuild), RECT288R (dogbone), and RECT288X (outer axle stub and hex)
description revised by: SN September 26, 2018
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov