Hot Racing AET133308
$12.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Aluminum Wheelie Bar - Associated 18T or Losi Mini-
Hot Racing wheelie bar and rear skid plate for the Associated 18T or 1/18 Losi Mini-T. This installs at rear of chassis and prevents vehicle from flipping over backwards during wheelies.
- Aluminum construction with solid rubber tires
- Adjustable wheelie bar with three positions
- Aluminum skid plate
- One (1) wheelie bar assembly
- Installation onto vehicle
- Installation on the Losi Mini-T will require two (2) 2x10mm flat head screws
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
- Horizontal length: 2 inch (51mm)
- Width between tires: 1.45 inch (37mm)
- Tire diameter: 22mm
- Tire width: 4mm
- See Hot Racing RVXS133W for replacement/spare tires
description revised by: SN July 1, 2015
FEATURES:
- Aluminum construction with solid rubber tires
- Adjustable wheelie bar with three positions
- Aluminum skid plate
YOU WILL RECEIVE:
- One (1) wheelie bar assembly
REQUIREMENTS:
- Installation onto vehicle
- Installation on the Losi Mini-T will require two (2) 2x10mm flat head screws
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
SPECIFICATIONS:
- Horizontal length: 2 inch (51mm)
- Width between tires: 1.45 inch (37mm)
- Tire diameter: 22mm
- Tire width: 4mm
COMMENTS:
- See Hot Racing RVXS133W for replacement/spare tires
description revised by: SN July 1, 2015
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov