Schelle Racing Innovations SHL-SCHCOMBO
$44.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Combo B6.1 Extreme Battery Strap Mount and Fan
COMBO DEAL includes carbon fiber strap, printed fan mount, and J5D HV Fan for $44.00 !!!
Run your 30mm cooling fan in a secure location that will clear the body and blow directly onto the motor can and winding. The Schelle Extreme Battery Strap Fan Mount COMBO comes with everything to install onto your Team Associated B6.1, T6.1, and SC6.1 trucks and buggies. It also adapts to the older B6 buggy lineup as well.
With the new 6.1 series gearbox design, racers scrambled for a cooling fan location that can blow on the motor to keep the temps in check and the performance consistent. Utilizing the optional center pivot mount holes on the Schelle SCH1282 Extreme Carbon Battery Strap, a 30mm fan can sit inside the cab of the body, clear the motor wiring, and blow directly onto the motor windings to cool the stator.
Fan Mount
Battery Strap SCH1282 and Fan INCLUDED
Secure mount at 45 degree angle to blow directly onto the motor windings with the bodyshell acting like a fan shroud
3-d printed in the USA out of durable black polymer
Pre-tapped fan mount holes for easy install
Fits popular bodies in laydown and layback configurations: Kit B6.1, JC S2, JC Finnisher.
Fits B6.1, T6.1, SC6.1, and older B6 series.
Installation:
Install fan to 3-d mount from the back with M3x16 BH screws, clamping the fan against the mount.
Use M3x8 FH screws to install the mount onto the battery strap using the FRONT 2 mount holes. Running the fan back too far will have clearance issues with the bodyshell.
Plug in 30mm fan and route wires to Rx.
Run your 30mm cooling fan in a secure location that will clear the body and blow directly onto the motor can and winding. The Schelle Extreme Battery Strap Fan Mount COMBO comes with everything to install onto your Team Associated B6.1, T6.1, and SC6.1 trucks and buggies. It also adapts to the older B6 buggy lineup as well.
With the new 6.1 series gearbox design, racers scrambled for a cooling fan location that can blow on the motor to keep the temps in check and the performance consistent. Utilizing the optional center pivot mount holes on the Schelle SCH1282 Extreme Carbon Battery Strap, a 30mm fan can sit inside the cab of the body, clear the motor wiring, and blow directly onto the motor windings to cool the stator.
Fan Mount
FEATURES:
Battery Strap SCH1282 and Fan INCLUDED
Secure mount at 45 degree angle to blow directly onto the motor windings with the bodyshell acting like a fan shroud
3-d printed in the USA out of durable black polymer
Pre-tapped fan mount holes for easy install
Fits popular bodies in laydown and layback configurations: Kit B6.1, JC S2, JC Finnisher.
Fits B6.1, T6.1, SC6.1, and older B6 series.
Installation:
Install fan to 3-d mount from the back with M3x16 BH screws, clamping the fan against the mount.
Use M3x8 FH screws to install the mount onto the battery strap using the FRONT 2 mount holes. Running the fan back too far will have clearance issues with the bodyshell.
Plug in 30mm fan and route wires to Rx.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov