Power Racing Production PRPP2301
$23.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Meter glow plug igniter w/charger
Glow Plug Igniter with Cap Meter and AC Charger from HPI Racing.
The glow starter is used to heat a glow plug while starting an engine.
Blue machined and knurled aluminum battery holder.
NiCd cell provides higher voltage under a load than an alkaline cell.
Meter has green area for charged and red area for must recharge.
Spring-loaded locking socket design.
Comes on a picture instruction header card.
One Panasonic 1.2volt, 1600mAh sub-C size NiCd Battery
One AC Charger (United States Standard)
Adaptor Output: DC 1.25V at 170mA
Shaft length: 2-1/4" (57mm)
The glow starter is used to heat a glow plug while starting an engine.
Blue machined and knurled aluminum battery holder.
NiCd cell provides higher voltage under a load than an alkaline cell.
Meter has green area for charged and red area for must recharge.
Spring-loaded locking socket design.
Comes on a picture instruction header card.
YOU WILL RECEIVE:
One Glow Starter with Cap Volt Meter. One Panasonic 1.2volt, 1600mAh sub-C size NiCd Battery
One AC Charger (United States Standard)
REQUIREMENTS:
Charging of NiCd battery for ten hours before use. SPECIFICATIONS:
Adaptor Input: AC 120V~60Hz 2W (United States Standard)Adaptor Output: DC 1.25V at 170mA
Shaft length: 2-1/4" (57mm)
COMMENTS:
Battery for this glow-starter can be replaced with another Best use SMC4600 and you can play all day and night.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov