Kyosho KYOMZW206
$40.98
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
Mzw206 ball diff set mr02
This is the Optional Ball Differential Set for the Kyosho Mini-Z MR2 Vehicles.
******Will Not Work On The F1 Series Mini-Zs**********
Complete assembly with 42 tooth plastic spur gear, 5 thrust balls,
steel shaft, pressure plates, adjustable housing, wheel hubs,
and ball bearing.
One assembled ball differential
Two rubber O-rings
One 1.5mm allen wrench
Two 3mm white plastic bushings
One 3 x 3mm set screw
One 3x5x.2mm shim
One 2mm E-clip
Differential grease, use KYOC2162.
Length of shaft: 65mm
Width from pressure plate to outside of adjust collar: 6.5mm
The plastic bushings included with the ball diff set cannot be
replaced with bearings due to flat spots cut into the bushings for
installation between the wheel hub notches.
******Will Not Work On The F1 Series Mini-Zs**********
FEATURES:
Complete assembly with 42 tooth plastic spur gear, 5 thrust balls,
steel shaft, pressure plates, adjustable housing, wheel hubs,
and ball bearing.
INCLUDES:
One assembled ball differential
Two rubber O-rings
One 1.5mm allen wrench
Two 3mm white plastic bushings
One 3 x 3mm set screw
One 3x5x.2mm shim
One 2mm E-clip
REQUIREMENTS:
Differential grease, use KYOC2162.
SPECIFICATIONS:
Length of shaft: 65mm
Width from pressure plate to outside of adjust collar: 6.5mm
The plastic bushings included with the ball diff set cannot be
replaced with bearings due to flat spots cut into the bushings for
installation between the wheel hub notches.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov