Associated ASC90008

This is the 2.4GHZ radio controlled, brushless electric powered, 1/10 scale RTR SC10 4x4 Short Course Racing Truck from Associated. This version has the Monster Energy trim scheme driven by Kyle Leduc. Chassis: Composite modular construction with low CG and Low Polar Moment Design Motor: Reedy 550 SL 3500kV brushless Electronic Speed Control: Water resistant XP SC1200 with cooling fan and removable tray for easy clean up and maintenance Radio: XP3-SS 2.4GHz 3-channel with S2008MG high-torque metal-gear steering servo Drive: Hybrid belt/gear drive, four wheel 5mm heavy duty belt system with external tension adjustment, CVAs with captured drive pins and heavy duty 6mm alloy axles Slipper Clutch: Decoupled design allows front and rear wheels to slip independently for greater traction and stability under bumpy conditions Differentials: Sealed, fluid filled, 32 pitch planetary gears Shocks: Oil-filled aluminum body 13mm big bore with low friction X- ring seals Body: Trimmed with Rockstar/Makita paint scheme Receiver Box: Sealed, water resistant Steering: Angled bellcrank "coplanar" steering with servo saver, ball bearing equipped with adjustable steering stops Ball Bearings: Full set included Wheels: 12mm hex drive replica Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm) diameter, 1.7" (43mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle RTR SC10 4x4 Short Course Racing Truck with painted Body, ESC, Brushless Motor, 2.4GHz Radio w/Steering Servo and Instruction Manual AA Batteries: Six AA Battery: 6-cell NiMH or 2-cell LiPo with Deans Ultra Plug Battery Charger: To match selected battery Building and track equipment Vehicle- Length: 21.6" (550mm) Width: 11.5" (293mm) Weight: 6.1lbs (2775g) weight will vary slightly depending on electronics used Wheelbase: 12.9" (327mm) Track: 9.6" (245mm) distance from outer edges of tires, side-to- side Internal Gear Ratio: 2.57:1 Body- Length 21.6" (550mm) Width 11.5" (293mm) at front fenders, widest point 8.8" (224mm) at center section, narrowest point Height: 6" (153mm) Available with the following race trimmed bodies; ASCD9005, Lucas Oil driven by Carl Renezeder ASCD9006 Pro Comp driven by Travis Coyne ASCD9007 Rockstar/Makita driven by Kyle and Todd Leduc ASCD9008 Monster Engery driven by Kyle Leduc For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Transmission 1 DTXC1561 2 3/16 x 3/8" Transmission 1 DTXC1423 2 3/16 x 3/8" Idler Gear 1 DTXC1423 4 3/16 x 3/8" Rear Hubs 2 DTXC1423 4 3/16 x 3/8" Front Hubs 2 DTXC1423 jxs 08/19/13 ir/jxs &