Associated ASC9061

This is the 1/10 scale electric powered, radio controlled,
Associated Factory Team B44.1 4WD off-road Buggy kit.
Chassis: Revised LiPo specific 0.10" (2.5mm) thick carbon fiber
chassis and top plate, chassis cut for additional ground clearance
composite front bulkhead and rear chassis plate
Drive: Four wheel shaft with CVA joints with pin retainer clips
Diffs: Ball type with lightweight outdrives
Bearings: Full set
Shocks: Factory Team V2 aluminum threaded shocks with TiN gold shock
shafts, bleed screw caps and blue Factory Team aluminum shock
bushings
Shock Oil: 30wt (ASCC8074) and 35wt (ASCC8080) silicone
Shock Springs: Silver front (ASCC4402) and Green rear (ASCC4386)
Shock Towers: 0.14" (3.5mm) thick woven carbon fiber
Slipper Clutch: V2 assembly with high-rate spring for more consistent
adjustments, dual sided externally adjustable
Spur Gear: 48 pitch, 84 tooth nylon construction (ASCC9653)
Motor Mount: Factory Team blue aluminum cam motor mount set
Front Tires: Pro-Line M3 Holeshot 1.57" (40mm) wide, 2.2" (56mm)
diameter (ASCC9769)
Rear Tires: Pro-Line M3 Holeshot 1.53" (38mm) wide, 2.2" (56mm)
diameter (ASCC9590)
Front Wheels: 2.2" diameter, 1.03" (26mm) wide white dish (ASCC9767)
Rear Wheels: 2.2" diameter, 1.5" (38mm) wide white dish (ASCC9589)
Foam Inserts: Included for front and rear
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Factory Team: Blue aluminum servo mounts, shock bushings, shock pivot
balls, wheel spacers and more
Body: Clear polycarbonate JConcepts Punisher with chassis undeRTRay
and 6.5" high downforce wing
Steering: Ball bearing steering with adjustable servo saver
One B44.1 4WD buggy kit with oil-filled shocks, clear body, tires,
foam inserts, wheels, titanium turnbuckles, Factory Team parts,
decals and photo-illustrated manual
Radio: 2ch with one servo
Radio Batteries: (8) AA size
Pinion Gear: number of teeth to be determined by motor
Motor: brushless for best performance
Electronic Speed Control: Compatible with selected motor
Battery: 6-cell saddle configuration
Charger: AC/DC charger timed or peak for 6-cell battery
Building and track equipment
Vehicle;
length: 14.56" (370mm)
width: 9.84" (250mm)
Wheelbase: 11" (276mm)
Weight: 3.7lbs (1715g)
Gear Ratio: 2.5:1
Body;
length: 11.2" (285mm)
width: 5.4" (138mm)
height: 2.7" (69mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x5/16" Front and Rear Ball Diff 2 DTXC1413
4 3/8x5/8" Front and Rear Ball Diff 2 DTXC1437
2 .187x.196" Center Slipper 1 ASCC7935
4 3/16x3/8" Front and Rear Gearbox 2 DTXC1423
2 .78x.250" Steering Bellcrank 1 ASCC9746
2 .125x.250" Steering Bellcrank 1 ASCC9746
4 3/16x3/8" Front Steering Blocks 2 DTXC1423
2 3/16x3/8" Inner Rear Hub Carrier 1 DTXC1423
2 3/16x1/2" Outer Rear Hub Carrier 1 ASCC7935
jxs 12/02/10
ir/jxs
&