Novak NOV3055
$94.25
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Mongoose Crawler Micro Bl System 18.5t
This is the Novak 18.5T Mongoose Crawler Micro Brushless System.
Micro sensor-based system specifically designed for 1/18-scale
crawler vehicles.
Mongoose ESC- (NOVM1718)
Four user-selectable throttle profiles (3 brushless, 1 brushed) with
zero reverse delay
Fully programmable interface using Novak's One-Touch button to
adjust high-power Hill/Drag
LiPo cut-off circuitry can be activated in all four throttle profiles
Brakes, minimum drive and deadband
Built-in motor rotation reversing (brushless modes only)
Zero Reverse Delay available in all profiles for instant power
delivery in both forward and reverse
Water resistant case
Three-80 Micro Pro 18.5 Turn Brushless Motor-
380 size with sensor-based commutation
High strength sintered rotor with 1/8" (3.2mm) diameter shaft
Oversized Front Bearing for extra durability and extended life
Aluminum ribbed end bells for additional cooling
Direct-Solder Wiring Tabs for flexible soldering options
Completely rebuildable
120 day warranty on both components
Mongoose ESC, Three-80 Micro Pro 18.5 Turn Brushless Motor, MOD 0.5
15T pinion gear and instruction manual
Installing in vehicle and connecting to battery (connector required
depending on type installed on battery)
Mongoose ESC-
Forward/Reverse: Forward, Hill/Drag Brake, Reverse
Input Voltage: 2-3 Li-Poly cells or 4-9 NiMH/NiCd cells (1.2V/cell)
On-Resistance*: 0.0038 ohms per phase (brushless/brush)
Size: 1.15" x 0.95" (29 x 24.3 mm)
Weight: 3.31 oz. (93.7 grams)
Rated & Braking Current*: 40 amps per phase (brushless/brush)
*Transistor's rating at 25 degrees C junction temperature
Power Wires: 16-gauge
BEC: 6.0 volt / 2.0 amps
Motor Limit: 18.5-turn (brushless); 22-turn (brushed mode) 380-size
or smaller motor
Battery Plug: none
Motor Plug: 2mm connectors
Voltage Cut-Off: 6.25 volts (2S), 9.38 (3S) when Li-Poly cut-off
circuitry is enabled
Three-80 Micro Pro 18.5 Turn Brushless Motor
Turns: 18.5
Design: Sensor based
Watts: 82
Kv (unloaded): 4,400 RPM/volt
Motor Size: 380, 1.02" D x 1.48" L (26 x 37.7mm)
Shaft Diameter: 1/8" (3.2mm) accepts all existing pinion gears
Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x
3mm)
jxs 3/10/09
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov