Novak NOV3024

This is the Novak HV Pro High Voltage Brushless 4.5 Motor System with 5mm Shaft Ideal upgrade system for the TRA E-Maxx and E-Revo, HPI E-Savage and the Kyosho Twin Force monster trucks. High voltage speed control and sensored Brushless motor efficiently replaces the stock two brush motor system resulting in significantly higher speeds and longer run times Less maintenance than Brushed motors-no brushes, springs or commutator to wear out 120 day limited warranty Motor Easily fits in TRA E-Maxx and E-Revo, Kyosho Twin Force and HPI E-Savage One HV4.5 brushless motor replaces two 550 brushed motors Direct solder wiring tabs Nickel plated sintered rotor and aluminum ribbed end bells Sensor based technology Locked rotor and thermal overload protection Completely enclosed Low cogging Maintenance free Excellent low-speed driveability Ball bearings (replaceable front end bell and bearing) Factory installed heat sink Electronic Speed Control Three throttle programs with one-touch set up FWD/BRK/REV, FWD/BRK, FWD/BRK/25%REV Dual battery inputs with factory installed connectors Locked rotor detection, digital anti-glitch and thermal overload protection User-replaceable input harness No external receiver pack required BEC handles high-power servo Gold plated PCB direct solder wiring tabs Reverse Disable (program 2) 25% Reverse and Brakes (program 3) Digital microprocessor controlled, specially designed for Brushless motor control Radio-Priority and Polar-Drive circuitry One HV4.5 Brushless motor, high-voltage Electronic Speed Control dust cover, cooling fan mounting bracket and instructions Installing in vehicle and connecting to batteries and receiver HV4.5 Brushless Motor Length: 2.84" (72.1mm) Diameter: 1.41" (35.8mm) Weight: Motor: 8.36oz (295g) Heat Sink: 1.97oz (69.5g) Shaft Diameter: 5mm (compatible with Novak Mod 1 (5100-5110) and 32p (5152-5157) pinion gears with 5mm bore kV (unloaded): 4,800 RPM/volt Watts: 750 Input Voltage: up to 14 cells (1.2V/cell) Commutation: Sensor based Electronic Magnet: Nickel-plated sintered high-strength neodymium Performance: Approx. 20% longer run-times (capable of between 40-45 MPH in a basic E-Maxx setup with improved drivetrain parts) Pro High Voltage Brushless Speed Control: Input Voltage: 6-14 cells (1.2V DC/cell) or 2S-4S LiPO cells Forward/Braking/Reverse Case Size: 1.75" x 2.17" x 0.85" (44mm x 55mm x 21mm) Weight: 4.8oz (135g) Throttle Programs: Three BEC (Battery Eliminator Circuitry): 6V/3A Watts: 375 On-Resistance: 0.0013 x 2 Ohms Rated Current: 400A/phase @ 25°C MOSFET temp. Braking Current: 400A/phase @ 25°C MOSFET temp. Max Discrete Steps: 256 Motor/Battery Wires: 14AWG silicone #3524 HV 4.5 Brushless Motor available separately, NOVC3524 jxs 10/16/06 ir/jxs &