Novak NOV1734
$99.59

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Havoc 3s brushless /Brush Traxxas Plug
This is the Novak Havoc Electronic Speed Control with TRA Plugs for
Brushed and Brushless Motors.
Functions on either two or three cell LiPo batteries in addition to
4-9 NiMH cells
Auto-detect brushed motor and battery type modes
Thermal Overload Protection circuitry allows ESC to operate only with
the SS-Pro series or other brushless motors with built-in thermal
protection that follow ROAR guidelines
Fully programmable, user-friendly interface with nine adjustable
parameters:
Minimum Brake (10 settings from 0-27%), Drag Brake (10 settings
from 0-27%)
Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from
1-5%) Throttle Curve (Linear and Expo), Brake Frequency* (7
settings from 1-8 kHz), Reverse*, Motor Rotation* and LiPo Cut-Off
* Available only in brushless mode
Smart Braking II enables users to shift from forward to reverse
Sensor-based for excellent braking and low-speed driveability
Water-resistant case with gasket seal
Locked rotor detection
120 day warranty
Novak Havoc Electronic Speed Control with heat sink, cooling fan,
power trans cap module, instructions and double-sided tape
Installing in vehicle and connecting to battery, motor and receiver
Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell)
Size: 1.18 x 1.54" (30 x 39.1mm)
Weight (without wires): 1.50oz (42.6g)
Motor Limit (brushless): 8.5-turn Novak 540-size sensored motor
Motor Limit (brushed): 27-turn for 540-size motor/12-turn for 550-
size motor
On-Resistance (brushless): 0.0012 ohms @ 25°C trans. temp
BEC: 6.0 volts DC / 1.5 amps
Rated Current: 120 Amps @ 25°C trans. temp
Braking Current: 120 Amps @ 25°C trans. temp
Status LEDs: 4
Voltage Cut-Off: 6.25V (2S) when LiPo cut-off circuitry is enabled
or 9.75V (3S) when Li-Po Cut-Off Circuitry is enabled
Power Wires: 14G super-flex copper-strand silicone wire
Motor & Battery Plugs: TRA battery connector & gold plated
Bullet Motor Plugs
The following parts are available for this speed control;
NOVM5315 5315 Input Harness Plug 4.5"
NOVM5320 5320 Input Harness Plug 9"
NOVM5600 5600 Switch Harness
NOVC5648 5648 Cooling Fan 30X30X6mm
NOVM5686 5686 Power Trans-Cap Module-3S LiPo replacement
NOVM5463 5463 3-Amp High Voltage BEC
NOVC5731 5731 Connector 3.5mm
jxs 10/26/10
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS: