Castle Creations CSE010-0091-00
$259.95
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
9100 1:10 Mamba Max Pro Sc System + 2400 Kv
Castle Creations Mamba Max Pro Speed Control with 2400 kV Sensorless, brushless Motor.
Rated for 4S maximum input
Suitable for use with stock gearing on AWD (all wheel drive) vehicles in basher applications not recommended for 2WD vehicles
Switching BEC provides power for servo and receiver all the way to 6S
Profiles can be custom designed on a PC with the included Castle Link
PC programming software
Infinitely adjustable throttle and brake curves with timing advance
Punch Control allows dialing in horsepower where needed
Brake Strength allows straight tracking under hard braking
Drag Brake helps entry into corners
Start Power for smooth launches
Four pole motor
Replaces 550 size motors
Powerful 2400kV motor
Installing in vehicle
Electronic Speed Control-
Cells: 6-12 NiCd/ NiMh, 2-6 cell LiPo
Brake: Proportional
Reversible: Yes, with lockout
Low Voltage Cut-off: Programmable
Size: 45.5mm x 36.5 x 21.5mm (1.79"x1.44"x0.85")
Weight: 81g (2.8oz)
2400 kV Motor-
Input Voltage: Max of 5S LiPo (14.8V) or 14 cell NiCd/ NiMh (16.8V)
length: 2.7" (69.5mm)
diameter: 1.4" (36mm)
Weight: 10.6oz (301.5g)
Shaft diameter: 1/8" (3.715mm)
Connector Type: 4mm bullet type connector
Motor Wire length: 4" leads (101mm)
description revised by: DB February 25, 2013
FEATURES:
Suitable for use with stock gearing on AWD (all wheel drive) vehicles in basher applications not recommended for 2WD vehicles
Switching BEC provides power for servo and receiver all the way to 6S
Profiles can be custom designed on a PC with the included Castle Link
PC programming software
Infinitely adjustable throttle and brake curves with timing advance
Punch Control allows dialing in horsepower where needed
Brake Strength allows straight tracking under hard braking
Drag Brake helps entry into corners
Start Power for smooth launches
Four pole motor
Replaces 550 size motors
Powerful 2400kV motor
YOU WILL RECEIVE:
Castle Creations Mamba Max Pro Electronic Speed Control, 2400kV motorREQUIREMENTS:
SPECIFICATIONS:
Cells: 6-12 NiCd/ NiMh, 2-6 cell LiPo
Brake: Proportional
Reversible: Yes, with lockout
Low Voltage Cut-off: Programmable
Size: 45.5mm x 36.5 x 21.5mm (1.79"x1.44"x0.85")
Weight: 81g (2.8oz)
2400 kV Motor-
Input Voltage: Max of 5S LiPo (14.8V) or 14 cell NiCd/ NiMh (16.8V)
length: 2.7" (69.5mm)
diameter: 1.4" (36mm)
Weight: 10.6oz (301.5g)
Shaft diameter: 1/8" (3.715mm)
Connector Type: 4mm bullet type connector
Motor Wire length: 4" leads (101mm)
description revised by: DB February 25, 2013
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov