Hot Racing STE875
Hardened Steel Spur Gear (75t 48p)(Green) - TRA
Hot Racing light weight hardened steel 75 tooth, 48 pitch spur gear for the TRA Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride vehicles
- Replaces stock nylon spur gear
- Black oxide coated gear for durability and corrosion resistance
- Green anodized countersunk aluminum washers
- High strength hardware
- Three (3) mounting screws
- Three (3) green anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
- Gear Pitch: 48 pitch
- Mounting Holes: 3
- Tooth Face width: ~5mm
- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of
the motor and ESC.
description revised by: SN July 19, 2017
FEATURES:
- CNC machined and lightened hardened steel construction- Replaces stock nylon spur gear
- Black oxide coated gear for durability and corrosion resistance
- Green anodized countersunk aluminum washers
- High strength hardware
YOU WILL RECEIVE:
- One (1) 75 tooth 48 pitch spur gear- Three (3) mounting screws
- Three (3) green anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
SPECIFICATIONS:
- Number of Teeth: 75- Gear Pitch: 48 pitch
- Mounting Holes: 3
- Tooth Face width: ~5mm
COMMENTS:
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of
the motor and ESC.
description revised by: SN July 19, 2017
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov