Hot Racing SJT255
Steel Spur Gear (55t 0.8 Mod)(Purple) - TRA
Hot Racing 55 tooth, 32 pitch (0.8 Mod) spur gear for the 1/10 TRA E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, and Summit
- CNC machined and lightened hardened steel construction
- Black oxide coating for durability and corrosion resistance
- Purple anodized countersunk washers
- Three (3) mounting screws
- Three (3) purple anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
- Number of Teeth: 55
- Gear Pitch: 32 pitch (0.8 module)
- Mounting Holes: 3
- Tooth Face width: 6mm (0.24 inch)
- Internal diameter: ~11mm (~0.43 inch)
- Hardened clutch bell or pinon gear
- Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
description revised by: SN July 19, 2017
FEATURES:
- Black oxide coating for durability and corrosion resistance
- Purple anodized countersunk washers
YOU WILL RECEIVE:
- 55 tooth 32 pitch spur gear- Three (3) mounting screws
- Three (3) purple anodized countersunk washers
- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
SPECIFICATIONS:
- Gear Pitch: 32 pitch (0.8 module)
- Mounting Holes: 3
- Tooth Face width: 6mm (0.24 inch)
- Internal diameter: ~11mm (~0.43 inch)
REQUIREMENTS:
- Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
description revised by: SN July 19, 2017
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov