Pinecar PIN361
Pre-Cut Block
Create Your Own Original Car Design with the Basic Block from PineCar.
Easy to shape and sand.
This block of wood serves as the platform on which you will design
and build your derby car.
Pre-cut, plain block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealer
Drill
Wheels
Axles
Weight(s)
Pencil
Paint
width: 1-3/4 (43mm)
height: 1-1/4 (32mm)
pine wood car: WOOU2600
Dry Transfer Burnisher
PPRY1035
Sanding Block
PINY1357
Wheel Turning Mandrel
PINZ1383
Building & Racing Book
PINY1382
Racer Display Stand
FEATURES:
Carefully selected, fine-grained soft wood. Easy to shape and sand.
This block of wood serves as the platform on which you will design
and build your derby car.
Pre-cut, plain block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.
YOU WILL RECEIVE:
One Wood Block BodyREQUIREMENTS:
Coping Saw or Hand Saw Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealer
Drill
Wheels
Axles
Weight(s)
Pencil
Paint
SPECIFICATIONS:
length: 7 (178mm) width: 1-3/4 (43mm)
height: 1-1/4 (32mm)
COMMENTS:
The following items are helpful for building and displaying your pine wood car: WOOU2600
Dry Transfer Burnisher
PPRY1035
Sanding Block
PINY1357
Wheel Turning Mandrel
PINZ1383
Building & Racing Book
PINY1382
Racer Display Stand
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov