PowerHobby PHBPHBMA01
BMA-01 brushless Motor Analyzer; RPM KV Voltage Checker
BMA-01 brushless Motor Analyzer; RPM, KV, Voltage Checker, Motolyzer (Sensored & Sensorless)
This motor analyzer is a precision electronic device that is specially designed for measuring the KV value, RPM, current draw, motor timing, vibration noise level, and function of hall effect sensors of a brushless motor. It comes with a 2X16 character LCD that is able to display real-time values of either sensored or sensorless brushless motors.
KV / VOLT / RPM / AMP:
KV (RPM per Volt) Shows the rotor RPM/Volt at a certain throttle power level.
U (VOLT) Shows the input voltage to the motor checker.
RPM (Revolution Per Minutes) Shows the rotor Revolution at a certain throttle power level.
I (AMP) Shows the current drawn by the motor at a certain throttle power level.
MOTOR TIMING - Physical end bell timing, usually between 0 and 70 degrees, requires tools to rotate the sensor board.
NOISE LEVEL - Poor assembly, inferior bearings, or unbalanced rotors can generate a vibration. This vibration is adverse to the performance of the motor. By measuring this, you can select the "quietest" motor.
Phase A, B, and C Sensor Timing: Shows the actual timing of all three sensor elements
Input Voltage: 7.4-8.4V (Suggested to Use 7.4V 2S 1P LiPo Battery)
LCD Display Screen: Blue Backlight Background, White Text, 16 Characters x2 Lines
KV Value Accuracy: +/- 3%
Motor Timing Accuracy: +/- 4%
Motor Timing Range: 0-70 deg
Noise Level Measurement Range: 60dB - 120dB
Supported Motor: Sensored or Sensorless brushless Motors (2 to 36 Poles)
Size
length: 80.6mm
width: 136.5mm
height: 24.5mm
(3) Motor Cables
(1) Motor Sensor Cable
(1) DC Input Power Cable w/Banana Connector
(1) DC Input Power Cable w/Tamiya Connector
(1) Instruction Manual
This motor analyzer is a precision electronic device that is specially designed for measuring the KV value, RPM, current draw, motor timing, vibration noise level, and function of hall effect sensors of a brushless motor. It comes with a 2X16 character LCD that is able to display real-time values of either sensored or sensorless brushless motors.
KV / VOLT / RPM / AMP:
KV (RPM per Volt) Shows the rotor RPM/Volt at a certain throttle power level.
U (VOLT) Shows the input voltage to the motor checker.
RPM (Revolution Per Minutes) Shows the rotor Revolution at a certain throttle power level.
I (AMP) Shows the current drawn by the motor at a certain throttle power level.
MOTOR TIMING - Physical end bell timing, usually between 0 and 70 degrees, requires tools to rotate the sensor board.
NOISE LEVEL - Poor assembly, inferior bearings, or unbalanced rotors can generate a vibration. This vibration is adverse to the performance of the motor. By measuring this, you can select the "quietest" motor.
Phase A, B, and C Sensor Timing: Shows the actual timing of all three sensor elements
SPECIFICATIONS:
Net Weight: 282 grams (Without Cables)Input Voltage: 7.4-8.4V (Suggested to Use 7.4V 2S 1P LiPo Battery)
LCD Display Screen: Blue Backlight Background, White Text, 16 Characters x2 Lines
KV Value Accuracy: +/- 3%
Motor Timing Accuracy: +/- 4%
Motor Timing Range: 0-70 deg
Noise Level Measurement Range: 60dB - 120dB
Supported Motor: Sensored or Sensorless brushless Motors (2 to 36 Poles)
Size
length: 80.6mm
width: 136.5mm
height: 24.5mm
YOU WILL RECEIVE:
(1) brushless Motor Analyzer(3) Motor Cables
(1) Motor Sensor Cable
(1) DC Input Power Cable w/Banana Connector
(1) DC Input Power Cable w/Tamiya Connector
(1) Instruction Manual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov