Hot Racing LMCB311
Speed Run Wheelie Bar Losi Micro B/T
Hot Racing wheelie bar for Team Losi Micro B or T
- Ball bearing polyurethane wheel
- Two (2) Ball Bearing
- Two (2) polyurethane wheel
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
grade 304
tensile strength (mpa) min 515
yield strength 0.2% proof (mpa) min 205
elongation (% in 50mm) min 40
rockwell hardness b (hr b) max 92
brinell hardness (hb) max 201
FEATURES:
- Wheelie bar is stainless steel construction- Ball bearing polyurethane wheel
YOU WILL RECEIVE:
- One (1) wheelie bar assembly- Two (2) Ball Bearing
- Two (2) polyurethane wheel
REQUIREMENTS:
- Installation onto vehicle- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
SPECIFICATIONS:
shiny stainless steelgrade 304
tensile strength (mpa) min 515
yield strength 0.2% proof (mpa) min 205
elongation (% in 50mm) min 40
rockwell hardness b (hr b) max 92
brinell hardness (hb) max 201
COMMENTS:
For on Roadonly. 
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov