Hot Racing SXRT93511F
35t/11t HT Helical Diff Ring/Pinion Front Gear TRA XRT X Maxx
Hot Racing Hi Torque steel helical spiral 35T/11T Front gear set for TRA X Maxx XRT 4WD
The 42/13T gear set is the stock gear ratio.
- High carbon steel construction
- Stronger than the stock bevel gears
- More torque can be transmitted through a physical gear with fewer teeth ratio
- One (1) 11 tooth spiral cut pinion gear
- Medium threadlock (blue threadlocking compound) if screws are threaded into metal
- Hot Racing SPL10G05 high temp grease recommended for the diff gear.
- Use Silicone Diff Fluid for Gear Diffs inside.
- Must replace as a set
The 42/13T gear set is the stock gear ratio.
FEATURES:
- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel gears. - High carbon steel construction
- Stronger than the stock bevel gears
- More torque can be transmitted through a physical gear with fewer teeth ratio
YOU WILL RECEIVE:
- One (1) 35 tooth diff spiral cut ring gear- One (1) 11 tooth spiral cut pinion gear
REQUIREMENTS:
- Installation following kit manual must replace as a set. - Medium threadlock (blue threadlocking compound) if screws are threaded into metal
- Hot Racing SPL10G05 high temp grease recommended for the diff gear.
- Use Silicone Diff Fluid for Gear Diffs inside.
SPECIFICATIONS:
- Weight: 3.35oz (66.75g)COMMENTS:
- Replaces TRA 7779 and 7777- Must replace as a set
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov