Hot Racing AON505F06
3 Cell 50 Mm Motor Cooling Fan Kit Arrma 1/8
This is the Hot Racing Monster Blower clip-on universal heat sink and fan for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX or custom projects.
- Large 50x50x11mm 7-blade fan
- Clip-on design for simple installation
- Black and Blue anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
- One (1) EC5-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
- Replacement Hot Racing 50x50x11mm fan is MH505F
- Please Note some picture might show it had XT90 plug but they all have updated to EC5 plug
description revised by: SN January 30, 2019
FEATURES:
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance- Large 50x50x11mm 7-blade fan
- Clip-on design for simple installation
- Black and Blue anodized aluminum heat sink provides efficient heat transfer
- Adapter with EC5
- 12AWG and 24 AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan- One (1) EC5-style adapter connector
REQUIREMENTS:
- Installation- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (blue threadlocking compound) on fan mount screws
- Ensure fan blades are protected
- This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
SPECIFICATIONS:
- Fan Size: 50x50x11mm- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
COMMENTS:
- If you are using single 6 cell pack please order AON505F02- Replacement Hot Racing 50x50x11mm fan is MH505F
- Please Note some picture might show it had XT90 plug but they all have updated to EC5 plug
description revised by: SN January 30, 2019
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov