Hot Racing AON133XR
Speed Run Stainless Steel Wheelie Bar for Arrma 1/8
Hot Racing wheelie bar for the 1/8th Arrma BLX
- Two length and 3 setting.
- Ball bearing polyurethane wheel
- Four (4) Ball Bearing
- Two (2) polyurethane wheel
- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
- Width between tires: 2.75 inch (70mm)
- Tire diameter: 31mm
- Tire width: 8mm
FEATURES:
- Wheelie bar is 2mm stainless steel construction- Two length and 3 setting.
- Ball bearing polyurethane wheel
YOU WILL RECEIVE:
- One (1) wheelie bar assembly- Four (4) Ball Bearing
- Two (2) polyurethane wheel
REQUIREMENTS:
- Installation onto vehicle- Recommended to use a removable-type locking adhesive on screws threading into metal
- Tires have a pressed steel hub bushing that may be glued to the tire if the hub slips
SPECIFICATIONS:
- Horizontal length: 7.4 inch (188mm)- Width between tires: 2.75 inch (70mm)
- Tire diameter: 31mm
- Tire width: 8mm
COMMENTS:
For on Road speed round only. 
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov