Hot Racing SCF125P19
Center One-Way Pulley 19t SC10 4x4
Optional replacement CENTER ONE-WAY PULLEY 19T For SC10 4x4
CNC Hard Anodized PULLEY 19T
the front one-way assembly.
By installing this Center One-Way Pulley onto your SC10 4x4,
the default full-time 4WD setup becomes a part-time 4WD setup. Braking forces are applied to the rear wheels only, shifting the machine's handling characteristics toward over-steering, which is more suitable for courses need more steering.
This item is not recommended in R/C race tracks that have heavy braking areas as the Truck will tend to over steer or spin out.
description revised by: WP April 1, 2014
FEATURES:
6mm ONE-WAY bearingCNC Hard Anodized PULLEY 19T
YOU WILL RECEIVE:
One CENTER ONE-WAY PULLEY 19TREQUIREMENTS:
Removing the front differential from your car and replacing it withthe front one-way assembly.
By installing this Center One-Way Pulley onto your SC10 4x4,
the default full-time 4WD setup becomes a part-time 4WD setup. Braking forces are applied to the rear wheels only, shifting the machine's handling characteristics toward over-steering, which is more suitable for courses need more steering.
This item is not recommended in R/C race tracks that have heavy braking areas as the Truck will tend to over steer or spin out.
description revised by: WP April 1, 2014
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov