Hot Racing AON9043
$48.88
in stock? YES
Steel Helical Diff Ring/Pinion 1/8 Arrma
Hot Racing steel helical spiral 43T/10T gear set for Arrma 1/8 4WD
The 43T/10T gear set is the stock gear ratio.
- High carbon steel construction
- Stronger than the stock bevel gears
- Maintains the stock 43T/10T ratio
- One (1) 10 tooth spiral cut pinion gear
- Medium threadlock (blue threadlocking compound) if screws are threaded into metal
- Hot Racing SPL10G05 high temp grease recommended for the diff gear.
- Use Silicone Diff Fluid for Gear Diffs inside.
- Do Not work with EXB 29mm Diff
The 43T/10T gear set is the stock gear ratio.
FEATURES:
- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel gears. - High carbon steel construction
- Stronger than the stock bevel gears
- Maintains the stock 43T/10T ratio
YOU WILL RECEIVE:
- One (1) 43 tooth diff spiral cut ring gear- One (1) 10 tooth spiral cut pinion gear
REQUIREMENTS:
- Installation following kit manual must replace as a set. - Medium threadlock (blue threadlocking compound) if screws are threaded into metal
- Hot Racing SPL10G05 high temp grease recommended for the diff gear.
- Use Silicone Diff Fluid for Gear Diffs inside.
SPECIFICATIONS:
- Weight: 32.35oz (66.75g)COMMENTS:
- Replaces AR310497, ARAC4008, ARAC5060, and AR310498 (must replace as a set) - Do Not work with EXB 29mm Diff
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov